Lone Star Trailer Parts stocks steel trailer fenders for single and tandem axle trailers, in smooth 16-gauge steel and heavier treadplate, plus pre-cut fender backs. Call 903.572.0288.

Smooth steel fenders (16 gauge)

Size (width x length) Style Typical use
7 x 28 in. Standard Small single-axle trailers
9 x 32 in. Standard Single axle
10 x 36 in. Square broke Single axle
10.75 x 32 and 36 in. 1 in. lip Single axle
9 x 72 in. Straight or teardrop Tandem axle
10 x 72 in. Drop, square broke Tandem axle
10.75 x 72 in. Straight or drop Tandem axle

Treadplate fenders (11 to 14 gauge)

Treadplate fenders double as a step and stand up to boots and equipment: 9 x 32 in. single-axle and 9 x 72 in. and 9.5 x 77 in. tandem fenders in straight, drop and square-broke styles.

Fender backs

Pre-cut fender backs (31 x 12 in., 69 x 12 in., 69.75 x 12 in.) in smooth and treadplate close in the inside of the fender to keep mud and rocks off the load.

Choosing a fender

Measure the tire’s width and diameter and allow clearance for suspension travel. Fender width should cover the tread; length should cover the tire (single) or both tires (tandem). Straight fenders bolt or weld flat; teardrop and drop fenders curve down at the ends.

Mounting

Fenders weld or bolt to the trailer frame or to fender brackets. Leave at least a couple of inches between the top of the tire and the fender when the trailer is loaded, so the tire can’t rub when the springs compress. Check the clearance with the trailer loaded before welding a new fender in place. Paint or coat bare steel after welding so it doesn’t rust at the seams.

Matching a fender

Bring the old fender’s width and length, or the tire size and whether the trailer is single or tandem axle, and we’ll match it.

Questions

Smooth or treadplate?

Smooth fenders are lighter and cheaper; treadplate is heavier gauge and handles being stepped on.

Do you sell fenders by themselves?

Yes. Call for freight if you’re ordering several.