A worn bearing or a leaking seal is the most common reason a trailer ends up on the side of the road. Lone Star Trailer Parts stocks hubs, brake drums, bearings, races, seals and dust caps for 2,000 to 16,000 lb axles in Mount Pleasant, Texas, and ships them anywhere. Call 903.572.0288.
Complete hub and drum kits
Our complete kits come with the hub or drum, inner and outer bearings, seal, dust cap and lug nuts, ready to install:
| Axle | Lug pattern | Idler hub | Electric brake drum |
|---|---|---|---|
| 3,500 lb | 5 on 4.5 | LS545I.1 | LS545EB.1 |
| 3,500 lb | 5 on 4.75 | LS5475I.1 | LS5475EB.1 |
| 3,500 lb | 5 on 5 | LS550I.1 | LS550EB.1 |
| 3,500 lb | 5 on 5.5 | LS555I.1 | LS555EB.1 |
| 3,500 lb | 6 on 5.5 | LS655I.1 | LS655EB.1 |
| 5,200 lb | 6 on 5.5 | LS52655I.1 | LS52655EB.1 |
| 6,000 to 7,000 lb | 8 on 6.5 | LS12865I.1 | LS12865EB.1 |
We also sell bare hubs and drums, from 2,000 lb 4 on 4 idler hubs to 8 on 6.5 drums.
Bearings and races
| Axle | Inner bearing | Outer bearing |
|---|---|---|
| 2,000 to 3,500 lb | L68149 (3,500 lb) | L44649 |
| 5,200 lb | 25580 | 15123 |
| 6,000 to 7,000 lb | 25580 | 14125A |
These are the common sizes; always check the numbers stamped on the old bearing and race. We stock the matching races (cups) too.
Seals and caps
- Grease seals for 2,000 lb through 16,000 lb axles, including Dexter and AL-KO sizes and the 10,000 lb #99 spindle seal
- Solid dust caps and EZ Lube dust caps with rubber plugs for 2,000 to 7,000 lb hubs
- Spindle nuts, tang washers, “D” washers, cotter pins and lug nuts
When to service bearings
Dexter’s maintenance schedule calls for inspecting, cleaning and repacking wheel bearings, and inspecting seals, every 12 months or 12,000 miles. Any seal you remove should be replaced. Our guide to trailer wheel bearings walks through the job.
Matching the right part
Bring or photograph the old part, or give us the axle capacity, lug pattern and the numbers on the bearing or seal. If you’re not sure of the lug pattern, see trailer bolt patterns.
Questions
Is a complete kit worth it?
Usually. If a bearing has failed, the race and seal are rarely worth reusing, and the kit costs less than buying the pieces separately.
Can I grease EZ Lube hubs without taking them off?
EZ Lube spindles have a grease fitting in the end so you can add grease with the hub in place. You still need to pull the hubs to inspect bearings on the schedule above.