Most trailers with brakes use either electric drum brakes or hydraulic brakes. They do the same job in different ways. Here’s how to choose, and what each needs.

Electric brakes

An electromagnet in each brake grabs the spinning drum and pushes the shoes out. The tow vehicle’s brake controller sends the signal.

  • Needs: a brake controller in the truck and a 7-way connector
  • Pros: adjustable from the cab, simple, the standard on utility, car hauler and equipment trailers
  • Cons: magnets and wiring need checking; not suited to trailers dunked in water
  • Sizes we stock: 10 in. (typical on 3,500 lb axles) and 12 in. (typical on 5,200 to 7,000 lb axles)

Surge hydraulic brakes

A surge coupler senses the trailer pushing on the truck when you slow down and pushes fluid to hydraulic brakes.

  • Needs: a surge coupler; no controller in the truck
  • Pros: works with any tow vehicle; common on boat trailers
  • Cons: brakes only respond to the trailer’s push, not your pedal; reversing may need a lockout
  • In Texas, surge brakes are allowed on trailers of 15,000 lb gross or less (Transportation Code Sec. 547.402).

Electric-over-hydraulic

An electric actuator on the trailer pumps hydraulic pressure when the truck’s controller tells it to. It combines cab control with hydraulic brakes (drum or disc). We stock Dexter 12,000 lb axles set up for electric-over-hydraulic.

Maintenance

Dexter’s schedule calls for testing brakes every trip, adjusting drum brakes every 3 months or 3,000 miles (unless self-adjusting), checking magnets and controller output every 6 months or 6,000 miles, and inspecting linings, drums, cylinders and lines every 12 months or 12,000 miles.

When are brakes required?

See Texas trailer brake laws.

Parts

Trailer brake parts: 10 in. and 12 in. electric and hydraulic backing plates, drums and hydraulic lines. Call 903.572.0288.

Questions

Can I switch from hydraulic to electric?

Yes, by changing the backing plates and coupler and adding wiring. Tell us the axle and we’ll list the parts.

Why do my electric brakes do nothing?

Check the controller, the 7-way plug and the ground first. See trailer light wiring.