A bolt pattern (lug pattern) is written as the number of studs and the diameter of the circle they sit on: 5 on 4.5 means five studs on a 4.5-inch circle. Hubs and wheels must match exactly. Here’s how to measure and what each pattern is used for.

How to measure

  • 4, 6 or 8 studs: measure from the center of one stud straight across to the center of the stud directly opposite.
  • 5 studs: there’s no stud directly opposite, so measure from the center of one stud to the outside edge of the stud farthest from it, skipping one in between.

Common trailer patterns

Pattern Our code Typical axle
4 on 4 2,000 lb
5 on 4.5 545 2,000 to 3,500 lb
5 on 4.75 5475 3,500 lb
5 on 5 550 3,500 lb
5 on 5.5 555 3,500 lb
6 on 5.5 655 3,500 and 5,200 lb
8 on 6.5 865 6,000 to 7,000 lb and up

The code is the one we use in our axle and hub part numbers; for example, a 3.5K 655 EB drum is a 3,500 lb electric brake drum with a 6 on 5.5 pattern.

Why it matters

The wheel, hub and lug nuts all have to match. A wheel that’s close but not exact won’t seat, and can loosen and come off. When changing hubs, keep the same pattern unless you’re changing all the wheels too.

Parts by pattern

We stock complete hub and drum kits in every pattern above, and tire and wheel assemblies in 5 on 4.5, 5 on 5, 6 on 5.5 and 8 on 6.5.

Lug nuts

Match lug nuts to the stud size and the wheel’s seat (most steel trailer wheels use 60-degree cone nuts). Torque them to the wheel maker’s spec, and recheck after the first few miles on new wheels.

Questions

Is 5 on 4.5 the same as 5 on 114.3 mm?

Yes. 4.5 inches is 114.3 mm.

Can I use an adapter?

Wheel adapters exist, but they add stress and offset. On a loaded trailer, matching the hub to the wheels is the safer fix.