A coupler and ball are only as safe as their match. The ball size must match the coupler exactly, and every part of the hitch must be rated for the trailer’s weight. Here’s how to get it right.
Ball sizes
| Ball | Typical use |
|---|---|
| 1-7/8 in. | Small, light trailers |
| 2 in. | Most utility and small car trailers |
| 2-5/16 in. | Heavier bumper-pull and gooseneck trailers |
The size is stamped on the coupler, usually on top, and on the ball. A smaller ball in a larger coupler can pop out.
Ratings
Every ball, coupler, ball mount and receiver has a weight rating stamped on it. Your towing limit is the lowest rating in the chain, including the truck’s hitch and the safety chains. Our couplers range from 5,000 lb A-frame couplers to 30,000 lb gooseneck couplers.
Shank size
The ball’s shank has to fit the hole in the ball mount: 3/4, 1 or 1-1/4 inches. A loose fit lets the ball rock and the nut loosen. Use the right size or a bushing made for it.
Coupler types
- A-frame: bolts or welds between two tongue rails
- Straight: fits a straight tube or channel tongue
- Adjustable channel: lets you raise or lower the coupler to level the trailer
- Gooseneck: round or square tube, for in-bed hitches
- Pintle: a ring on the trailer and a hook on the truck, for heavy and rough service
Safety chains
Cross the chains under the tongue so they can catch it if the coupler lets go, and leave enough slack to turn. In Texas, safety chains are required when a car or light truck tows a trailer (Transportation Code Sec. 545.410, with exceptions for agricultural trailers).
Parts
See couplers, balls and receivers, or call 903.572.0288.
Questions
How do I know what size my coupler is?
Look for the stamping on top of the coupler, or measure the socket.
Can I weld on a coupler?
Many couplers are weld-on. Use proper welds and follow the coupler maker’s instructions.