To replace a trailer axle you need a handful of measurements. Get them right and the new axle bolts in; get one wrong and the wheels rub the fenders or the springs don’t line up. Here’s how to measure.

1. Hub face

Hub face is the distance from the outside face of one hub (where the wheel mounts) to the outside face of the other hub. Measure across the trailer with the wheels off, or from the inside of one wheel mounting surface to the other. Common sizes on our axles include 73, 75, 85, 89, 90 and 95 inches.

2. Spring center

Spring center is the distance between the centers of the two leaf springs, where the springs sit on the axle. Measure from the center of one spring to the center of the other. Spring center is usually close to the outside width of the trailer frame. Common pairs are 95 in. hub face with 80 in. spring center, and 89 or 90 in. hub face with 74 in. spring center.

3. Capacity

Look for a tag or sticker on the axle tube. If it’s gone:

Clues Likely capacity
2-3/8 in. round tube, 5-lug hubs 3,500 lb
3 in. round tube, 6 on 5.5 hubs 5,200 lb
3 in. round tube, 8 on 6.5 hubs 6,000 to 7,000 lb

Confirm with the bearing numbers and the trailer’s VIN tag, which lists the GAWR (gross axle weight rating).

4. Lug pattern

Count the studs and measure the bolt circle. See trailer bolt patterns.

5. Brakes

Idler (no brakes), electric (two wires at each backing plate) or hydraulic (a brake line at each backing plate).

6. Straight, drop or torsion

A drop axle has the spindle above the tube. A torsion axle has no leaf springs; see ordering a torsion axle.

Ordering

With these six things, we can match or build the axle: 3,500 to 7,000 lb axles are built to any length. Call 903.572.0288 or see trailer axles.

Questions

Should I replace both axles on a tandem?

If one is bent or worn out, check the other carefully. Matching axles keep the load even.

Can I go up in capacity?

Only if the frame, springs, tires, wheels and coupler are rated for it too. The trailer’s rating is set by its weakest part.